What is selective toxicity and discuss its importance in anti infective therapies?

INTRODUCTION

Drugs have been used for the treatment of infectious diseases since the 17th century (eg, quinine for malaria and emetine for amebiasis); however, chemotherapy as a science began in the first decade of the 20th century with understanding of the principles of selective toxicity, the specific chemical relationships between microbial pathogens and drugs, the development of drug resistance, and the role of combined therapy. Experiments by the German physician and scientist Paul Erlich led to the arsphenamines for syphilis, the first planned chemotherapeutic regimen.

The current era of antimicrobial chemotherapy began in 1935 with the discovery of the sulfonamides by German physician and scientist Gerhard Domagk. In 1940, it was demonstrated that penicillin, discovered in 1929 by Scottish physician and scientist Sir Alexander Fleming, could be an effective therapeutic substance. During the next 25 years, research on chemotherapeutic agents focused largely on substances of microbial origin called antibiotics. The isolation, concentration, purification, and mass production of penicillin were followed by the development of streptomycin, tetracyclines, chloramphenicol, and many other agents. These substances were originally isolated from filtrates of media in which their respective molds and filamentous bacteria had grown. Synthetic modification of previously described drugs has been prominent in the development of new antimicrobial agents.

Antimicrobial agents commonly used in the treatment of patients with bacterial infections are presented in this chapter. The chemotherapy of viruses, fungi, and parasites is discussed in Chapters 30, 45, and 46, respectively. Additional comments on antimicrobial susceptibility testing for bacteria are found in Chapter 47.

MECHANISMS OF ACTION OF ANTIMICROBIAL DRUGS

Antimicrobial drugs act in one of several ways: by selective toxicity, by inhibition of cell membrane synthesis and function, by inhibition of protein synthesis, or by inhibition of nucleic acid synthesis.

SELECTIVE TOXICITY

An ideal antimicrobial agent exhibits selective toxicity, which means that the drug is harmful to a pathogen without being harmful to the host. Often, selective toxicity is relative rather than absolute; this implies that a drug in a concentration tolerated by the host may damage an infecting microorganism.

Selective toxicity may be a function of a specific receptor required for drug attachment, or it may depend on the inhibition of biochemical events essential to the pathogen but not to the host. The mechanisms of action of antimicrobial drugs can be discussed under four headings:

  1. Inhibition of cell wall synthesis

  2. Inhibition of cell membrane function

  3. Inhibition of protein synthesis (ie, inhibition of translation and transcription of genetic material)

  4. Inhibition of nucleic acid synthesis

INHIBITION OF CELL WALL SYNTHESIS

Bacteria have a rigid outer layer, the cell wall. The cell wall maintains the shape and size of the microorganism, which has a high internal osmotic pressure. Injury to the cell wall (eg, by ...

Learning Objective

  • Describe the mechanisms of action associated with drugs that inhibit cell wall biosynthesis, protein synthesis, membrane function, nucleic acid synthesis, and metabolic pathways

An important quality for an antimicrobial drug is selective toxicity, meaning that it selectively kills or inhibits the growth of microbial targets while causing minimal or no harm to the host. Most antimicrobial drugs currently in clinical use are antibacterial because the prokaryotic cell provides a greater variety of unique targets for selective toxicity, in comparison to fungi, parasites, and viruses. Each class of antibacterial drugs has a unique mode of action (the way in which a drug affects microbes at the cellular level), and these are summarized in Figure 10.4and Table 10.1.

What is selective toxicity and discuss its importance in anti infective therapies?
Figure 10.4 There are several classes of antibacterial compounds that are typically classified based on their bacterial target.

Common Antibacterial Drugs by Mode of Action

Mode of Action

Target

Drug Class

Inhibit cell wall biosynthesis

Penicillin-binding proteins

β-lactams: penicillins, cephalosporins, monobactams, carbapenems

Peptidoglycan subunits

Glycopeptides

Peptidoglycan subunit transport

Bacitracin

Inhibit biosynthesis of proteins

30S ribosomal subunit

Aminoglycosides, tetracyclines

50S ribosomal subunit

Macrolides, lincosamides, chloramphenicol, oxazolidinones

Disrupt membranes

Lipopolysaccharide, inner and outer membranes

Polymyxin B, colistin, daptomycin

Inhibit nucleic acid synthesis

RNA

Rifamycin

DNA

Fluoroquinolones

Antimetabolites

Folic acid synthesis enzyme

Sulfonamides, trimethoprim

Mycolic acid synthesis enzyme

Isonicotinic acid hydrazide

Mycobacterial adenosine triphosphate (ATP) synthase inhibitor

Mycobacterial ATP synthase

Diarylquinoline

Table 10.1

Inhibitors of Cell Wall Biosynthesis

Several different classes of antibacterials block steps in the biosynthesis of peptidoglycan, making cells more susceptible to osmotic lysis (Table 10.2). Therefore, antibacterials that target cell wall biosynthesis are bactericidal in their action. Because human cells do not make peptidoglycan, this mode of action is an excellent example of selective toxicity. Antibiotics that inhibit the cell wall biosynthesis of bacteria include the penicillins (including ampicillin, amoxicillin, and methicillin), cephalosporins, vancomycin, and bacitracin. Although it may be administered orally or intramuscularly in some circumstances, bacitracin has been shown to be nephrotoxic (damaging to the kidneys). Therefore, it is more commonly combined with neomycin and polymyxin in topical ointments such as Neosporin.

Some of these antibiotics are natural antibiotics produced by fungi or bacteria, while others are semi-synthetic, where a natural antibiotic has been chemically modified in the lab.

Drugs that Inhibit Bacterial Cell Wall Synthesis

Mechanism of Action

Drug Class

Specific Drugs

Natural or Semisynthetic

Spectrum of Activity

Interact directly with PBPs and inhibit transpeptidase activity

Penicillins

Penicillin G, penicillin V

Natural

Narrow-spectrum against gram-positive and a few gram-negative bacteria

Ampicillin, amoxicillin

Semisynthetic

Narrow-spectrum against gram-positive bacteria but with increased gram- negative spectrum

Methicillin

Semisynthetic

Narrow-spectrum against gram-positive bacteria only, including strains producing penicillinase

Table 10.2

Drugs that Inhibit Bacterial Cell Wall Synthesis

Mechanism of Action

Drug Class

Specific Drugs

Natural or Semisynthetic

Spectrum of Activity

Cephalosporins

Cephalosporin C

Natural

Narrow-spectrum similar to penicillin but with increased gram-negative spectrum

First- generation cephalosporins

Semisynthetic

Narrow-spectrum similar to cephalosporin C

Second- generation cephalosporins

Semisynthetic

Narrow-spectrum but with increased gram-negative spectrum compared with first generation

Third- and fourth- generation cephalosporins

Semisynthetic

Broad-spectrum against gram-positive and gram- negative bacteria, including some β- lactamase producers

Fifth- generation cephalosporins

Semisynthetic

Broad-spectrum against gram-positive and gram- negative bacteria, including MRSA

Monobactams

Aztreonam

Semisynthetic

Narrow-spectrum against gram-negative bacteria, including some β- lactamase producers

Carbapenems

Imipenem, meropenem, doripenem

Semisynthetic

Broadest spectrum of the β-lactams against gram- positive and gram- negative bacteria, including many β- lactamase producers

Large molecules that bind to the peptide chain of peptidoglycan subunits, blocking transglycosylation and transpeptidation

Glycopeptides

Vancomycin

Natural

Narrow spectrum against gram-positive bacteria only, including multidrug- resistant strains

Block transport of

Bacitracin

Bacitracin

Natural

Broad-spectrum against

peptidoglycan subunits

gram-positive and gram-

across cytoplasmic

negative bacteria

membrane

Table 10.2

What is selective toxicity and discuss its importance in anti infective therapies?

  • Describe the mode of action of β-lactams.

Inhibitors of Protein Biosynthesis

The cytoplasmic ribosomes found in animal cells (80S) are structurally distinct from those found in bacterial cells (70S), making protein biosynthesis a good selective target for antibacterial drugs. Several types of protein biosynthesis inhibitors are discussed in this section and are summarized in Figure 10.5 and Table 10.3.

What is selective toxicity and discuss its importance in anti infective therapies?
Figure 10.5 The major classes of protein synthesis inhibitors target the 30S or 50S subunits of cytoplasmic ribosomes.

Protein Synthesis Inhibitors That Bind the 30S Subunit

Aminoglycosides are large, highly polar antibacterial drugs that bind to the 30S subunit of bacterial ribosomes, impairing the proofreading ability of the ribosomal complex responsible for making cellular proteins. The aminoglycosides, which include drugs such as streptomycin, gentamicin, neomycin, and kanamycin, are potent broad-spectrum antibacterials. However, aminoglycosides have been shown to be nephrotoxic (damaging to kidney), neurotoxic (damaging to the nervous system), and ototoxic (damaging to the ear).

Another class of antibacterial compounds that bind to the 30S subunit is the tetracyclines. In contrast to aminoglycosides, these drugs are bacteriostatic and inhibit protein synthesis by blocking the association of tRNAs with the ribosome during translation. Although the tetracyclines are broad spectrum in their coverage of bacterial pathogens, side effects that can limit their use include phototoxicity, permanent discoloration of developing teeth, and liver toxicity with high doses or in patients with kidney impairment.

Protein Synthesis Inhibitors That Bind the 50S Subunit

There are several classes of antibacterial drugs that work through binding to the 50S subunit of bacterial ribosomes. Specific examples include erythromycin, azithromycin, and chloramphenicol. The first drug discovered in this category was erythromycin. It was isolated in 1952 from Streptomyces erythreus. Compared with erythromycin, azithromycin has a broader spectrum of activity, fewer side effects, and a significantly longer half-life (1.5 hours for erythromycin versus 68 hours for azithromycin) that allows for once-daily dosing and a short 3-day course of therapy (i.e., Zpac formulation) for most infections.

The drug chloramphenicol represents yet another structurally distinct class of antibacterials that also bind to the 50S ribosome, inhibiting peptide bond formation. Chloramphenicol, produced by Streptomyces venezuelae, was discovered in 1947; in 1949, it became the first broad-spectrum antibiotic that was approved by the FDA. Although it is a natural antibiotic, it is also easily synthesized and was the first antibacterial drug synthetically mass produced. As a result of its mass production, broad-spectrum coverage, and ability to penetrate into tissues efficiently, chloramphenicol was historically used to treat a wide range of infections, from meningitis to typhoid fever to conjunctivitis. Unfortunately, serious side effects, such as lethal gray baby syndrome, and suppression of bone marrow production, have limited its clinical role. Because of toxicity concerns, chloramphenicol usage in humans is now rare in the United States and is limited to severe infections unable to be treated by less toxic antibiotics. Because its side effects are much less severe in animals, it is used in veterinary medicine.

Drugs That Inhibit Bacterial Protein Synthesis

Molecular Target

Mechanism of Action

Drug Class

Specific Drugs

Bacteriostatic or Bactericidal

Spectrum of Activity

30S

subunit

Causes mismatches between codons and anticodons, leading to faulty proteins that insert into and disrupt cytoplasmic membrane

Aminoglycosides

Streptomycin, gentamicin, neomycin, kanamycin

Bactericidal

Broad spectrum

Blocks association of tRNAs with ribosome

Tetracyclines

Tetracycline, doxycycline, tigecycline

Bacteriostatic

Broad spectrum

50S

subunit

Blocks peptide bond formation between amino acids

Macrolides

Erythromycin, azithromycin, telithromycin

Bacteriostatic

Broad spectrum

Lincosamides

Lincomycin, clindamycin

Bacteriostatic

Narrow spectrum

Not applicable

Chloramphenicol

Bacteriostatic

Broad spectrum

Interferes with the formation of the initiation complex between 50S and 30S subunits and other factors.

Oxazolidinones

Linezolid

Bacteriostatic

Broad spectrum

Table 10.3

What is selective toxicity and discuss its importance in anti infective therapies?

  • Compare and contrast the different types of protein synthesis inhibitors.

Inhibitors of Membrane Function

A small group of antibacterials target the bacterial membrane as their mode of action (Table 10.4). The polymyxins are natural polypeptide antibiotics that were first discovered in 1947 as products of Bacillus polymyxa; only polymyxin B and polymyxin E (colistin) have been used clinically. They are lipophilic with detergent-like properties and interact with the lipopolysaccharide component of the outer membrane of gram-negative bacteria, ultimately disrupting both their outer and inner membranes and killing the bacterial cells. Unfortunately, the membrane-targeting mechanism is not a selective toxicity, and these drugs also target and damage the membrane of cells in the kidney and nervous system when administered systemically. Because of these serious side effects and their poor absorption from the digestive tract, polymyxin B is used in over-the-counter topical antibiotic ointments (e.g., Neosporin), and oral colistin was historically used only for bowel decontamination to prevent infections originating from bowel microbes in immunocompromised patients or for those undergoing certain abdominal surgeries. The antibacterial daptomycin is a cyclic lipopeptide produced by Streptomyces roseosporus that seems to work like the polymyxins, inserting in the bacterial cell membrane and disrupting it. However, in contrast to polymyxin B and colistin, which target only gram-negative bacteria, daptomycin specifically targets gram-positive bacteria. It is typically administered intravenously and seems to be well tolerated, showing reversible toxicity in skeletal muscles.

Drugs That Inhibit Bacterial Membrane Function

Mechanism of Action

Drug Class

Specific Drugs

Spectrum of Activity

Clinical Use

Interacts with lipopolysaccharide in the outer membrane of gram-negative bacteria, killing the cell through the eventual disruption of the outer membrane and cytoplasmic membrane

Polymyxins

Polymyxin B

Narrow spectrum against gram-negative bacteria, including multidrug-resistant strains

Topical preparations to  prevent infections in wounds

Polymyxin E (colistin)

Narrow spectrum against gram-negative bacteria, including multidrug-resistant strains

Oral dosing to decontaminate bowels to prevent infections in immunocompromised patients or patients undergoing invasive surgery/procedures.

Intravenous dosing to treat serious systemic infections caused by multidrug-resistant pathogens

Inserts into the cytoplasmic membrane of gram-positive bacteria, disrupting the membrane and killing the cell

Lipopeptide

Daptomycin

Narrow spectrum against gram-positive bacteria, including

Complicated skin and skin-structure infections and bacteremia caused by gram-positive pathogens, including MRSA

Table 10.4

 

What is selective toxicity and discuss its importance in anti infective therapies?

  • How do polymyxins inhibit membrane function?

Inhibitors of Nucleic Acid Synthesis

Some antibacterial drugs work by inhibiting nucleic acid synthesis (Table 10.5). The drug rifampin is a semisynthetic member of the rifamycin family and functions by blocking RNA polymerase activity in bacteria. The RNA polymerase enzymes in bacteria are structurally different from those in eukaryotes, providing for selective toxicity against bacterial cells. It is used for the treatment of a variety of infections, but its primary use, often in a cocktail with other antibacterial drugs, is against mycobacteria that cause tuberculosis. Despite the selectivity of its mechanism, rifampin can induce liver enzymes to increase metabolism of other drugs being administered (antagonism), leading to hepatotoxicity (liver toxicity) and negatively influencing the bioavailability and therapeutic effect of the companion drugs.

Fluoroquinolones, such as ciprofloxacin, kills bacterial cells by blocking DNA replication.

Drugs That Inhibit Bacterial Nucleic Acid Synthesis
Mechanisms of Action Drug Class Specific Drugs Spectrum of activity Clinical Use
Inhibits bacterial RNA polymerase activity and blocks transcription, killing the cell Rifamycin Rifampin Narrow spectrum with activity against gram-positive and limited numbers of gram-negative bacteria. Also active against Mycobacterium tuberculosis. Combination therapy for treatment of tuberculosis
Inhibits the activity of DNA gyrase and blocks DNA replication, killing the cell Fluoroquinolones Ciprofloxacin, ofloxacin, moxifloxacin Broad spectrum against gram-positive and gram-negative bacteria Wide variety of skin and systemic infections

Table 10.5

What is selective toxicity and discuss its importance in anti infective therapies?

  • Why do inhibitors of bacterial nucleic acid synthesis not target host cells?

Inhibitors of Metabolic Pathways

Some synthetic drugs control bacterial infections by functioning as antimetabolites, competitive inhibitors for bacterial metabolic enzymes (Table 10.6). The sulfonamides (sulfa drugs) are the oldest synthetic antibacterial agents and are structural analogues of para-aminobenzoic acid (PABA), an early intermediate in folic acid synthesis (Figure 10.6). By inhibiting the enzyme involved in the production of dihydrofolic acid, sulfonamides block bacterial biosynthesis of folic acid and, subsequently, pyrimidines and purines required for nucleic acid synthesis. This mechanism of action provides bacteriostatic inhibition of growth against a wide spectrum of gram-positive and gram-negative pathogens. Because humans obtain folic acid from food instead of synthesizing it intracellularly, sulfonamides are selectively toxic for bacteria. However, allergic reactions to sulfa drugs are common. Another example of an antimetabolite that inhibits the folic acid synthesis pathway is trimethoprim, a synthetic antimicrobial compound (Figure 10.6). Trimethoprim is used in combination with the sulfa drug sulfamethoxazole to treat urinary tract infections, ear infections, and bronchitis. When used alone, each antimetabolite only decreases production of folic acid to a level where bacteriostatic inhibition of growth occurs. However, when used in combination, inhibition of both steps in the metabolic pathway decreases folic acid synthesis to a level that is lethal to the bacterial cell. Because of the importance of folic acid during fetal development, sulfa drugs and trimethoprim use should be carefully considered during early pregnancy.

Antimetabolite Drugs

Metabolic Pathway Target

Mechanism of Action

Drug Class

Specific Drugs

Spectrum of Activity

Folic acid synthesis

Inhibits the enzyme involved in production of dihydrofolic acid

Sulfonamides

Sulfamethoxazole

Broad spectrum against gram-positive and gram- negative bacteria

Sulfones

Dapsone

Inhibits the enzyme involved in the production of tetrahydrofolic acid

Not applicable

Trimethoprim

Broad spectrum against gram-positive and gram- negative bacteria

Table 10.6

What is selective toxicity and discuss its importance in anti infective therapies?
Figure 10.6 Sulfonamides and trimethoprim are examples of antimetabolites that interfere in the bacterial synthesis of folic acid by blocking purine and pyrimidine biosynthesis, thus inhibiting bacterial growth. 

What is selective toxicity and discuss its importance in anti infective therapies?

  • How do sulfonamides and trimethoprim selectively target bacteria?

Inhibitor of ATP Synthase

Bedaquiline, representing the synthetic antibacterial class of compounds called the diarylquinolines, uses a novel mode of action that specifically inhibits mycobacterial growth. Although the specific mechanism has yet to be elucidated, this compound appears to interfere with the function of ATP synthases, perhaps by interfering with the use of the hydrogen ion gradient for ATP synthesis by oxidative phosphorylation, leading to reduced ATP production. Due to its side effects, including hepatotoxicity and potentially lethal heart arrhythmia, its use is reserved for serious, otherwise untreatable cases of tuberculosis.

To learn more about the general principles of antimicrobial therapy and bacterial modes of action, visit Michigan State University’s Antimicrobial Resistance Learning Site (https://openstax.org/l/22MSUantireslea) , particularly pages 6 through 9.

What is selective toxicity and why is it important?

Treating Infections: Selective Toxicity The aim of antimicrobial therapy is to kill or inhibit the infecting organism without damaging the host; this is known as selective toxicity. This is commonly accomplished through the use of antimicrobial drugs.

Why is selective toxicity important to antimicrobial drugs?

An important quality for an antimicrobial drug is selective toxicity, meaning that it selectively kills or inhibits the growth of microbial targets while causing minimal or no harm to the host.

What is selective toxicity in toxicology?

Selective toxicity refers to species differences in toxicity between two species simultaneously exposed. This is the basis for the effectiveness of pesticides and drugs. For example: An insecticide is lethal to insects but relatively nontoxic to animals.

Which is the correct definition of selective toxicity?

The selective toxicity may be defined as adverse effect of a chemical to one form of life (cell or organism) without affecting other form of life, even though the two may exist in intimate contact .