Which information is used by the router to determine the path between the source and destination hosts?

 4.2 Routing Principles

In order to transfer packets from a sending host to the destination host, the network layer must determine the path or route that the packets are to follow.  Whether the network layer provides a datagram service (in which case different packets between a given  host-destination pair may take different routes) or a virtual circuit service (in which case all packets between a given source and destination will take the same path),  the network layer must nonetheless determine the path for a packet.  This is the job of the network layer routing protocol.

At the heart of any routing protocol is the algorithm (the "routing algorithm") that determines the path for a packet. The purpose of a routing algorithm is simple: given a set of routers, with links connecting the routers, a routing algorithm finds a "good" path from source to destination.  Typically, a "good" path is one which has "least cost," but we will see that in practice, "real-world" concerns such as policy issues (e.g., a rule such as "router X, belonging to organization Y should not forward any packets originating from the network owned by organization Z") also come into play to complicate the conceptually simple and elegant algorithms whose theory underlies the practice of routing in today's networks.

The graph abstraction used to formulate routing algorithms is shown in Figure 4.2-1. (To view some graphs representing real network maps, see [Dodge 1999]; for a discussion of how well different graph-based models model the Internet, see [Zegura 1997]).  Here, nodes in the graph represent routers - the points at which packet routing decisions are made - and the lines ("edges" in graph theory terminology) connecting  these nodes represent the physical links between these routers.  A link also has a value representing the "cost" of sending a packet across the link.  The cost may reflect the level of congestion on that link (e.g., the current average delay for a packet across that link) or the physical distance traversed by that link (e.g., a transoceanic link might have a higher cost than a terrestrial link).  For our current purposes, we will  simply take the link costs as a given and  won't worry about how they are determined.

Given the graph abstraction, the  problem of finding the least cost path from a source to a destination requires identifying a series of links such that:

• the first link in the path is connected to the source
• the last link in the path is connected to the destination
• for all i, the i and i-1st link in the path are connected to the same node
• for the least cost path, the sum of the cost of the links on the path is the minimum over all possible paths between the source and destination. Note that if all link costs are the same, the least cost path is also the shortest path (i.e., the path crossing the smallest number of links between the source and the destination).

Classification of Routing Algorithms

• A global routing algorithm computes the least cost path between a source and destination using complete, global knowledge about the network.  That is, the algorithm takes the connectivity between all nodes and all links costs as inputs.  This then requires that the algorithm somehow obtain this information before actually performing the calculation. The calculation itself can be run at one site (a centralized global routing algorithm) or replicated at multiple sites.  The key distinguishing feature here, however, is that a global algorithm has complete information about connectivity and link costs.  In practice, algorithms with global state information are often referred to as link state algorithms, since the algorithm must be aware of the state (cost) of each link in the network.  We will study a global link state algorithm  in section 4.2.1.
• In a decentralized routing algorithm, the calculation of the least cost path is carried out in an iterative, distributed manner. No node has complete information about the costs of all network links.  Instead, each node begins with only knowledge of the costs of its own directly attached links and then through an iterative process of calculation and exchange of information with its neighboring nodes (i.e., nodes which are at the "other end" of links to which it itself is attached) gradually calculates  the least cost path to a destination, or set of destinations.  We will study a decentralized routing algorithm known as a distance vector algorithm in section 4.2.2.  It is called a distance vector algorithm because a node never actually knows a complete path from source to destination.  Instead, it only knows the direction (which neighbor) to which it should forward a packet in order to reach a given destination along the least cost path, and the cost  of that path from itself to the destination.

Only two types of  routing algorithms are typically used in the Internet: a dynamic global  link state algorithm, and a dynamic decentralized distance vector algorithm.  We cover these algorithms in section 4.2.1 and 4.2.2 respectively.  Other routing algorithms are surveyed briefly in section 4.2.3.

4.2.1 A Link State Routing Algorithm

The link state algorithm we present below is known as Dijkstra's algorithm, named after its inventor (a closely related algorithm is Prim's algorithm; see [Corman 1990] for a general discussion of graph algorithms).  It computes the least cost path from one node (the source, which we will refer to as A) to all other nodes in the network.  Dijkstra's algorithm is iterative and has the property that after the kth iteration of the algorithm, the least cost paths are known to k destination nodes, and among the least cost paths  to all destination nodes, these k path will have the k smallest costs.  Let us define the following notation:

• c(i,j):  link cost from node i to node j.  If nodes i and j are not directly connected, then c(i,j) = infty. We will assume for simplicity that c(i,j) equals c(j,i).
• D(v): the cost of path from the source node to destination v that has currently (as of this iteration of the algorithm)  the least cost.
• p(v): previous node (neighbor of v) along current least cost path from source to v
• N: set of nodes whose shortest path from the source is definitively known

Link State (LS) Algorithm:

1  Initialization:
2    N = {A}
3    for all nodes v
4      if v adjacent to A
5        then D(v) = c(A,v)
6        else D(v) = infty
7
8   Loop
9     find w not in N such that D(w) is a minimum
10    add w to N
11    update D(v) for all v adjacent to w and not in N:
12       D(v) = min( D(v), D(w) + c(w,v) )
13    /* new cost to v is either old cost to v or known
14     shortest path cost to w plus cost from w to v */
15  until all nodes in N

• In the initialization step, the currently known least path costs from A to its directly attached neighbors, B, C and D are initialized to 2, 5 and 1 respectively.  Note in particular that the cost to C is set to 5 (even though we will soon see that a lesser cost path does indeed exists) since this is cost of the direct (one hop) link from A to C.  The costs to E and F are set to infinity since they are not directly connected to A.
• In the first iteration, we look among those nodes not yet added to the set N and find that node with the least cost as of the end of the previous iteration.  That node is D, with a cost of 1, and thus D is added to the set N.  Line 12 of the LS algorithm is then performed to update D(v) for all nodes v,  yielding the results shown in the second line (step 1) in Table 4.2-1. The cost of the path to B is unchanged.  The cost of the path to C (which was 5 at the end of the initialization) through node D is found to have a cost of 4.  Hence this lower cost path is selected and C's predecessor along the shortest path from A is set to D. Similarly,  the cost to E (through D) is computed to be 2, and the table is updated accordingly.
• In the second iteration, nodes B and E are found to have the shortest path costs (2), and we break the tie arbitrarily and add E to the set N so that N now contains A, D, and E.  The cost to the remaining nodes not yet in N, i.e., nodes B, C and F, are updated via line 12 of the LS algorithm , yielding the results shown in the third row in the above table.
• and so on ...

What is the computation complexity of this algorithm?  That is, given n nodes (not counting the source), how much computation must be done in the worst case to find the least cost paths from the source to all destinations?   In the first iteration, we need to search through all n nodes to determine the node, w, not in N that has the minimum cost.  In the second iteration, we need to check n-1 nodes to determine the minimum cost; in the third iteration n-2 nodes and so on.  Overall, the total number of nodes we need to search through over all the iterations  is n*(n+1)/2, and thus we say that the above implementation of the link state algorithm has worst case complexity of order n squared: O(n2). (A more sophisticated implementation of this algorithm, using a data structure known as a heap, can find the minimum in line 9 in logarithmic rather than linear time, thus reducing the complexity).

Before completing our discussion of the LS algorithm, let us consider a pathology that can arise with the use of link state routing. Figure 4.2-2 shows a simple network topology where link costs are equal to the load carried on the link, e.g., reflecting the delay that would be experienced .  In this example, link costs are not symmetric, i.e., c(A,B) equals c(B,A) only if the load carried on both directions on the AB link is the same.  In this example, node D originates a unit of traffic destined for A, node B also originates a unit of traffic destined for A, and node C injects an amount of traffic equal to e, also destined for A.  The initial routing is shown in Figure 4.2-2a, with the link costs corresponding to the amount of traffic carried.

When the LS algorithm is next run, node C determines (based on the link costs shown in Figure 4.2-2a) that the clockwise path to A has a cost of 1, while the counterclockwise path to A (which it had been using) has a cost of  1+e.  Hence C's least cost path to A is now clockwise.  Similarly, B determines that its new least cost path to A is also clockwise, resulting in the routing  and resulting path costs shown in Figure 4.2-2b.  When the LS algorithm is run next, nodes B, C and D all detect that a zero cost path to A in the counterclockwise direction and all route their traffic to the counterclockwise routes.  The next time the LS algorithm is run, B, C, and D all then route their traffic to the clockwise routes.

What can be done to prevent such oscillations in the LS algorithm?  One solution would be to mandate that link costs not depend on the amount of traffic carried -- an unacceptable solution since one goal of routing is to avoid highly congested (e.g., high delay) links.  Another solution is to insure that all routers do not run the LS algorithm at the same time.  This seems a more reasonable solution, since we would hope that even if routers run the LS algorithm with the same periodicity, the execution instants of the algorithm would not be the same at each node.  Interestingly, researchers have recently noted that routers in the Internet can self-synchronize among themselves [Floyd 1994], i.e., even though they initially execute the algorithm with the same period but at different instants of time, the algorithm execution instants can eventually become, and remain, synchronized at the routers.  One way to avoid such self-synchronization is to purposefully introduce randomization into the period between execution instants of the algorithm at each node.

Having now studied the link state algorithm, let's next consider the other major routing algorithm that is used in practice today - the distance vector routing algorithm.

4.2.2 A Distance Vector Routing Algorithm

The principal data structure in the DV algorithm is the distance table maintained at each node.  Each node's distance table has a row for each destination in the network and a column for each of its directly attached neighbors.  Consider a node X that is interested in routing to destination Y via its directly attached neighbor Z.  Node X's distance table entry, Dx(Y,Z) is the sum of the cost of the direct one hop link between X and Z, c(X,Z), plus neighbor Z's currently known minimum cost path from itself (Z) to Y. That is:

Dx(Y,Z) = c(X,Z) + minw{Dz(Y,w)}                                      (4-1)

The minw  term  in equation 4-1 is taken over all of Z's directly attached neighbors (including X, as we shall soon see).

Equation 4-1 suggests the form of the neighbor-to-neighbor communication that will take place in the DV algorithm -- each node must know the cost of each of its neighbors minimum cost path to each destination  Thus, whenever a node computes a new minimum cost to some destination, it must inform its neighbors of this new minimum cost.

Before presenting the DV algorithm, let's consider an example that will help clarify the meaning of entries in the distance table.  Consider the network topology and the distance table shown for node E in Figure 4.2-3. This is the distance table in node E once the Dv algorithm has converged.  Let's first look at the row for destination A.

• Clearly the cost to get to A from E via the direct connection to A has a cost of 1.  Hence DE(A,A) = 1.
• Let's now consider the value of DE(A,D) - the cost to get from E to A,  given that the first step along the path is D.  In this case, the distance table entry is the cost to get from E to D (a cost of 2)  plus whatever the minimum cost it is to get from D to A .  Note that the minimum cost from D to A is 3 -- a path that passes right back through E!  Nonetheless, we record the fact that the minimum cost from E to A given that the first step is via D has a cost of 5.   We're left, though, with an uneasy feeling that the fact the path from E via D loops back through E may be the source of problems down the road (it will!).
• Similarly, we find that the distance table entry via neighbor B is DE(A,B) = 14.  Note that the cost is not 15. (why?)

A circled entry in the distance table gives the cost of the least cost path to the corresponding destination (row).  The column with the circled entry identifies the next node along the least cost path to the destination.  Thus, a node's routing table (which indicates which outgoing link should be used to forward packets to a given destination) is easily constructed from the node's distance table.

In discussing the distance table entries for node E above, we informally took a global view, knowing the costs of all links in the network.  The distance vector algorithm we will now present is decentralized and does not use such global information.  Indeed, the only information a node will have are the costs of  the links to its directly attached neighbors, and information  it receives from these directly attached neighbors.  The distance vector algorithm we will study is also known as the Bellman-Ford algorithm, after its inventors.  It is used in many routing algorithms in practice, including: Internet BGP, ISO IDRP, Novell IPX, and the original ARPAnet.

Distance Vector (DV) Algorithm.  At each node, X:

1  Initialization:
2   for all adjacent nodes v:
3      DX(*,v) = infty        /* the * operator means "for all rows" */
4      DX(v,v) = c(X,v)
5   for all destinations, y
6      send minwD(y,w) to each neighbor  /* w over all X's neighbors */
7
8  loop
9    wait (until I see a link cost change to neighbor V
10         or until I receive update from neighbor V)
11
12   if (c(X,V) changes by d)
13     /* change cost to all dest's via neighbor v by d */
14     /* note: d could be positive or negative */
15     for all destinations y:  DX(y,V) =  DX(y,V) + d
16
17   else if (update received from V wrt destination Y)
18     /* shortest path from V to some Y has changed  */
19     /* V has sent a new value for its  minw DV(Y,w) */
20     /* call this received new value is "newval"     */
21     for the single destination y: DX(Y,V) = c(X,V) + newval
22
23   if we have a new minw DX(Y,w)for any destination Y
24      send new value of minw DX(Y,w) to all neighbors
25
26  forever

The key steps are lines 15 and 21, where a node updates its distance table entries in response to either a change of cost of an attached link or the receipt of an update message from a neighbor.  The other key step is line 24, where a node sends an update to  its neighbors if its minimum cost path to a destination has changed.

Figure 4.2-4 illustrates the operation of the DV algorithm for the simple three node network shown at the top of the figure.  The operation of the algorithm is illustrated in a synchronous manner, where all nodes simultaneously receive messages from their neighbors, compute new distance table entries, and inform their neighbors of any changes in their new least path costs.  After studying this example, you should convince yourself that the algorithm operates correctly in an asynchronous manner as well, with node computations and update generation/reception occurring at any times.

The  circled distance table entries in Figure 4.2-4 show the current least path cost to a destination.  An entry circled in red indicates that a new minimum cost has been computed (in either line 4 of the DV algorithm (initialization) or line 21). In such cases an update message will be sent (line 24 of the DV algorithm) to the node's neighbors as represented by the red arrows between columns in Figure 4.2-4.

Figure 4.2-4: Distance Vector Algorithm: example

The leftmost column in Figure 4.2-4 shows the distance table entries for nodes X, Y, and Z after the initialization step.

Let us now consider how node X computes the distance table shown in the middle column of Figure 4.2-4 after receiving updates from nodes Y and Z.   As a result of receiving the updates from Y and Z,  X computes in line 21 of the DV algorithm:

DX(Y,Z) = c(X,Z) + minw DZ(Y,w)
        =  7     +   1
        =  8
DX(Z,Y) = c(X,Y) + minw DY(Z,w)
        =  2     +   1
        =  3

The value DX(Z,Y) = 3 means that X's minimum cost to Z  has changed from 7 to 3.  Hence, X sends updates to Y and Z informing them of this new least cost to Z.  Note that X need not update Y and Z about its cost to Y since this has not changed.  Note also that Y's recomputation of its distance table in the middle column of Figure 4.2-4 does result in new distance entries, but does not result in a change of Y's least cost path to nodes X and Z.  Hence Y does not send  updates to X and Z.

The process of receiving updated costs from neighbors, recomputation of distance table entries, and updating neighbors of changed costs of the least cost path to a destination continues until no update messages are sent.  At this point, since no update messages are sent, no further distance table calculations will occur and the algorithm enters a quiescent state, i.e., all nodes are performing the wait in line 9 of the DV algorithm. The algorithm  would remain in the quiescent state until a link cost changes, as discussed below.
 

The Distance Vector Algorithm: Link Cost Changes and Link Failure

• At time t0, Y detects the link cost change (the cost has changed from 4 to 1) and informs its neighbors of this change since the cost of a minimum cost path has changed.
• At time t1, Z receives the update from Y and then updates its table. Since it computes a new least cost to X (it has decreased from a cos of 5 to a cost of 2), it informs its neighbors.
• At time t2, Y has receives Z's update and has updates  its distance table.  Y's least costs have not changed (although its cost to X via Z has changed) and hence Y does not send any message to Z. The algorithm comes to a quiescent state.

In Figure 4.2-5, only two iterations are required for the DV algorithm to reach a quiescent state.  The "good news" about the decreased cost between X and Y has propagated fast through the network.

Let's now consider what can happen when a link cost increases.  Suppose that the link cost between X and Y increases from 4 to 60.

Figure 4.2-6: Link cost changes: bad news travels slow and causes loops

•  At time t0 Y detects the link cost change (the cost has changed from 4 to 60).  Y computes its new minimum cost path to X to have a cost of 6 via node Z.  Of course, with our global view of the network, we can see that this new cost via Z is wrong.  But the only information node Y has  is that its direct cost to X is 60 and that Z has last told Y that Z could get to X with a  cost of 5.  So in order to get to X, Y would now route through Z, fully expecting that Z will be able to get to X with a cost of 5.  As of t1 we have a routing loop -- in order to get to X, Y routes through Z, and Z routes through Y.  A routing loop is like a black hole -- a packet arriving at Y or Z as of t1 will bounce back and forth between these two nodes forever ..... or until the routing tables are changed.

• Since node Y has computed a new minimum cost to X, it informs Z of this new cost at time t1
• Sometime after t1, Z receives the new least cost to X via Y (Y  has told Z that Y's new minimum cost is 6).  Z knows it can get to Y with a cost of 1 and hence computes a new least cost to X (still via Y) of 7.  Since Y's least cost to X has increased, it then informs Y of its new cost at t2.
• In a similar manner, Y then updates its table and informs Z of a new cost of 9.  Z then updates its table and informs Y of a new cost of 10, etc..

Distance Vector Algorithm: Adding Poisoned Reverse.

Figure 4.2-7 illustrates how poisoned reverse solves the particular looping problem we encountered before in Figure 4.2-6. As a result of the poisoned reverse, Y's distance table indicates an infinite cost when routing to X via Z (the result of Z having informed Y that Z's cost to X was infinity).  When the cost of the XY link changes from 4 to 60 at time t0, Y updates its table and continues to route directly to X, albeit at a higher cost of 60, and informs Z of this change in cost.  After receiving the update at t1, Z immediately shifts it route to X to be via the direct ZX link at a cost of 50.  Since this is a new least cost to X, and since the path no longer passes through Y, Z informs Y of this new least cost path to X at t2.  After receiving the update from Z, Y updates its distance table to route to X via Z at a least cost of 51.  Also, since Z is now on Y's least path to X, Y poisons the reverse path from Z to X by informing Z at time t3 that it (Y) has an infinite cost to get to X.  The algorithm becomes quiescent after t4, with distance table entries for destination X shown in the rightmost column in Figure 4.2-7.

Does poison reverse solve the general count-to-infinity problem?  It does not.  You should convince yourself that loops involving three or more nodes (rather than simply two immediately neighboring nodes, as we saw in Figure 4.2-7) will not be detected by the poison reverse technique.
 

A Comparison of Link State and Distance Vector Routing Algorithms

• Message Complexity.  We have seen that LS requires each node to know the cost of each link in the network. This requires O(nE) messages to be sent, where n is the number of nodes in the network and E is the number of links.  Also, whenever a link cost changes, the new link cost  must be sent to all nodes.  The DV algorithm requires message exchanges between directly connected neighbors at each iteration.  We have seen that the time needed for the algorithm to converge can depend on many factors. When link costs change, the DV algorithm will propagate the results of the changed link cost only if the new link cost results in a changed least cost path for one of the nodes attached to that link.
• Speed of Convergence.  We have seen that our implementation of the LS is an O(n2) algorithm requiring O(nE) messages, and potentially suffer from oscillations.  The DV algorithm can converge slowly (depending on the relative path costs, as we saw in Figure 4.2-7) and can have routing loops while the algorithm is converging.  DV also suffers from the count to infinity problem.
• Robustness.  What can happen is a router fails, misbehaves, or is sabotaged? Under LS, a router could broadcast an incorrect cost for one of its attached links (but no others). A node could also corrupt or drop any LS broadcast packets it receives as part of link state broadcast.  But an LS node is only computing its own routing tables; other nodes are performing the similar calculations for themselves.  This means route calculations are somewhat separated under LS, providing a degree of robustness. Under DV, a node can advertise incorrect least path costs to any/all destinations. (Indeed, in 1997 a malfunctioning router in a small ISP provided national backbone routers with erroneous routing tables. This caused other routers to flood the malfunctioning router with traffic, and caused large portions of the Internet to become disconnected for up to several hours [Neumann 1997].)  More generally, we note that at each iteration, a node's calculation in DV is passed on to its neighbor and then indirectly to its neighbor's neighbor on the next iteration.  In this sense, an incorrect node calculation calculation can be diffused through the entire network under DV.

4.2.3 Other Routing Algorithms

Nonetheless, many routing algorithms have been proposed by researchers over the past 30 years, ranging from the extremely simple to the very sophisticated and complex.  One of the simplest routing algorithms proposed is hot potato routing.  The algorithm derives its name from its behavior -- a router tries to get rid of (forward) an outgoing packet as soon as it can.  It does so by forwarding it on any outgoing link that is not congested, regardless of destination.  Although initially proposed quite some time ago, interest in hot-potato-like routing has recently been revived for routing in highly structured networks, such as the so-called Manhattan street network [Brassil 1994].

Another broad class of routing algorithms are based on viewing packet traffic as  flows between sources and destinations in a network.  In this approach, the routing problem can be formulated mathematically as a constrained optimization problem known as a network flow problem [Bertsekas 1991].  Let us define l ij as the amount of traffic (e.g., in packets/sec) entering the network for the first time at node i and destined for node j.  The set of flows, {l ij} for all i,j,  is sometimes referred to as the network traffic matrix.  In a network flow problem,  traffic flows must be assigned to a set of network links subject to constraints such as:

• the sum of the flows between all source destination pairs passing though link m must be less than the capacity of  link m;
• the amount of l ij traffic entering any router r (either from other routers, or directly entering that router from an attached host) must  equal the amount of l ij traffic leaving router either via one of r's outgoing links or to an attached host at that router.  This is a flow conservation constraint.

But what performance function should be optimized?  There are many possible choices.  If we make certain assumptions about the size of packets and the manner in which packets arrive at the various routers, we can use the so-called M/M/1 queueing theory formula [Kleinrock 1976] to express the average delay at linkas:

Dm  = 1 / (Rm - SiSj l ijm),

where Rm is  link m's capacity (measured in terms of the average number of packets/sec it can transmit) and SiSj l ijm is the total arrival rate of packets (in packets/sec) that arrive to link m. The overall network wide performance measure to be optimized might then be the sum of all link delays in the network, or some other suitable performance metric.  A number of elegant distributed algorithms exist  for computing the optimum link flows (and hence routing determine the routing paths, as discussed above).  The reader is referred to [Bertsekas 1991] for a detailed study of these algorithms.

The final set of routing algorithms we mention here are those derived from the telephony world.  These circuit-switched routing algorithms are of interest to packet-switched data networking in cases where per-link resources (e.g., buffers, or a fraction of the link bandwidth) are to  reserved (i.e., set aside) for each connection that is routed over the link.  While the formulation of the routing problem might appear quite different from the least cost routing formulation we have seen in this chapter, we will see that there are a number of similarities, at least as far as the path finding algorithm (routing algorithm) is concerned. Our goal here is to provide a brief introduction for this class of routing algorithms.  The reader is referred to [Ash 1998],[Ross 1995], [Girard 1990] for a detailed discussion of this active research area.

The circuit-switched routing problem formulation is illustrated in Figure 4.2-8. Each link has a certain amount of resources (e.g., bandwidth).  The easiest (and a quite accurate) way to visualize this is to consider the link to be a bundle of circuits, with each call that is routed over the link requiring the dedicated use of one of the link's circuits.  A link is thus characterized both by its total number of circuits, as well as the number of these circuits currently in use.  In Figure 4.2-8, all links except AB and BD have 20 circuits; the number to the left of the number of circuits indicates the number of circuits currently in use.
Figure 4.2-8: Circuit-switched routing

Suppose now that a call arrives at node A, destined to node D.  What path should be take?  In shortest path first (SPF) routing, the shortest path (least number of links traversed) is taken. We have already seen how the Dijkstra LS algorithm can be used to find shortest path routes.  In Figure 4.2-8, either that ABD or ACD path would thus be taken.  In least loaded path (LLP) routing, the load at a link is defined as the ratio of the number of used circuits at the link and  the total number of circuits at that link.  The path load  is the maximum of the loads of all links in the path.  In LLP routing, the path taken is that with the smallest path load.  In example 4.2-8, the LLP path is ABCD. In maximum free circuit (MFC) routing, the number of free circuits associated with a path is the minimum of the number of free circuits at each of the links on a path.   In MFC routing, the path the maximum number of free circuits is taken.  In Figure 4.2-8 the path ABD would be taken with MFC routing.

Given these examples from the circuit switching world, we see that the path selection algorithms have much the same flavor as LS routing.  All nodes have complete information about the network's link states.   Note however, that the potential consequences of old or inaccurate sate information are more severe with circuit-oriented routing -- a call may be routed along a path only to find that the circuits it had been expecting to be allocated are no longer available.  In such a case, the call setup is blocked and another path must be attempted. Nonetheless, the main differences between connection-oriented, circuit-switched routing and connectionless packet-switched routing come not in the path selection mechanism, but rather in the actions that must be taken when a connection is set up, or torn down, from source to destination.
 

References

Copyright Keith W. Ross and James F.  Kurose, 1996-2000.  All rights reserved.

Which information is used by the router to determine the path between the source and destination hosts *?

How does the router decide the destination?

What is router and its function How does routers locate a destination host?

What factors are used to determine path routing?