lt.levenhuk.com » Good to Know » Step-by-step guide on microscope slides preparation and further use Show
What can be more fun than exploring this diverse colorful microscopic world using your own independently prepared microscope slides! Some people prefer to acquire ready-to-use microscope slides in shops specializing in such things. Of course, that’s easier and will save you a little time. And some of our customers are simply not aware of how to do it and in what sequence. That's why we are about to share with you all required information about this delicate, but truly interesting process of preparing microscope slides at home! After you read this article this task won't cause any difficulties anymore. Moreover, you will be able to observe all those interesting things that can be found around your own house! So let’s begin! You will need:Microscope slide preparation using flat slide glass 1. Make sure that the blank slide, cover slip and dropper that you are going to use are perfectly clean, dry and dust free. Microscope slide preparation using concavity slide 1. Using the pipette, draw a few drops of the liquid you want to examine. Tips and warningsA typical fresh liquid microscope specimen “lives” about 10-30 minutes before it dries out. This time can be extended by up to several days by applying a thin layer of petroleum jelly on all four sides of the cover slip and then covering it in the conventional manner. The next thing to do is to apply light pressure on the edges of the cover slip. This procedure will create something like a sealed container and will prevent the sample from drying out too quickly. How to study a microscope slideObserving microorganisms under a microscope is a very simple and interesting activity! The procedure is quite simple: The microscope slide should be placed on a microscope stage and then clamped with special spring clips. But viewing slides under a microscope requires careful attention in order to increase the educational effect and minimize the chance of breakage. The detailed steps: 1.
Put your microscope on a flat surface. If your microscope is equipped with an electric illuminator, make sure that you have an outlet nearby. One piece of advice before you startAlthough objective lenses with low magnification never come too close to the slide, it is necessary to visually check the distance between the objective lens and the slide. High-power objectives can be easily lowered below the permissible range. This will damage the specimen or objective lens. It’s crucial to develop good habits while working with the instrument to prevent accidental damage of delicate optical elements. Which objective lens should you begin with when first viewing a slide specimen?Which Microscope Objective Should I Start With? Start Low! Since the 4x objective lens has the least magnification, but a larger field of view, it allows for more of the specimen to be seen, as well as locating the part of the sample you wish to view. This in turn makes it easier to focus on the sample.
Which objective should you use to start with when first finding a specimen?Why do you need to start with 4x in magnification on a microscope? The 4x objective lens has the lowest power and, therefore the highest field of view. As a result, it is easier to locate the specimen on the slide than if you start with a higher power objective.
In what order should the objective lenses be used to view the sample?As the observer focuses down, first the top thread comes into focus, then the middle one, and finally the bottom one. On higer power objectives one may go out of focus as another comes into focus.
Which objective lens should be in place at the beginning of the microscopic procedure?When you begin using the biological compound microscope, always begin with the 4x objective lens (the lowest magnification). This will allow you to focus on your sample and help prevent you from smashing your objective lens into the stage.
|